Pompa Limbah Tsurumi - PN Series

Tsurumi Waste Water Pump Submersible  Tsurumi PN Series 
Pompa Khusus cocok untuk Waster water / Air kotor / limbah

 The PN-series is one of the Tsurumi VANCS-series. Being made of stainless steel and special resin, the pump is not only lightweight but corrosion-resistant as well. The semi-vortex pump design with moderate impeller passage provides efficient performance for versatile applications.

1. Draining wastewater from residence, hotel, restaurant, etc
2. Pumping rainwater and springwater from basement
3. Circulating water in waterscape garden (e.g. waterfall, fountain, koi pond, etc)

Wastewater Vortex Impeller PN
270KB

PN Series The main components of the PN Pump are made of 304 stainless-steel and composite resin materials, making this an ultra-lightweight pump. Suitable for effluent applications where large solids are not likely to exist. Automatic and auto-alternating versions are available in all sizes.

PN Series Features

Watertight Cable Entrance with Anti-wicking block.
Permanently lubricated sealed ball bearings rated B-10 60,000 hours.
Built in motor protection
Continuous duty air filled copper wound highly efficient motor.
Corrosion Resistant Stainless Steel Motor Casing.
Dual inside mechanical with Silicon Carbide vs. Ceramic bottom faces.
Ball type air Relief valve
Solids handling semi-vortex impeller
Available Automatic Operation (PNA) / Auto Alternating (PNW)

Performance Range

Series	Model	Discharge Size (in.)	Phase	Motor Output (HP)	Voltage (V)	Diameter (in.)	Height (in.)	Weight (lbs.)
PN	50PN2.25	2	Three	1/3	230/460	9 5/8	14 15/16	16
PN	50PN2.25S	2	Single	1/3	115/230	9 5/8	14 15/16	17
PN	50PN2.4	2	Three	1/2	230/460	9 5/8	15 1/4	18
PN	50PN2.4S	2	Single	1/2	115/230	9 5/8	15 1/4	19
PN	50PN2.75	2	Three	1	230/460	9 5/8	15 7/8	22
PN	50PN2.75S	2	Single	1	115/230	9 5/8	15 7/8	24
PN	80PN21.5	3	Three	2	230/460	11 5/8	17 1/8	35
PN	80PN22.2	3	Three	3	208-220/460/575	8 3/8	22	49
PN	80PN23.7	3	Three	5	208-220/460/575	8 3/8	23 3/8	60
PNA	50PNA2.25	2	Three	1/3	230/460	9 5/8	14 15/16	17
PNA	50PNA2.25S	2	Single	1/3	115/230	9 5/8	14 15/16	18
PNA	50PNA2.4	2	Three	1/2	230/460	9 5/8	15 1/4	18
PNA	50PNA2.4S	2	Single	1/2	115/230	9 5/8	15 1/4	20
PNA	50PNA2.75	2	Three	1	230/460	9 5/8	15 7/8	23
PNA	50PNA2.75S	2	Single	1	115/230	9 5/8	15 7/8	25
PNA	80PNA21.5	3	Three	2	230/460	11 5/8	17 1/8	36
PNA	80PNA22.2	3	Three	3	208-220/460/575	8 3/8	28 1/4	51
PNA	80PNA23.7	3	Three	5	208-220/460/575	8 3/8	29 5/8	62
PNW	50PNW2.25	2	Three	1/3	230/460	9 5/8	14 15/16	17
PNW	50PNW2.25S	2	Single	1/3	115/230	9 5/8	14 15/16	19
PNW	50PNW2.4	2	Three	1/2	230/460	9 5/8	15 1/4	19
PNW	50PNW2.4S	2	Single	1/2	115/230	9 5/8	15 1/4	20
PNW	50PNW2.75	2	Three	1	230/460	9 5/8	15 7/8	23
PNW	50PNW2.75S	2	Single	1	115/230	9 5/8	15 7/8	25
PNW	80PNW21.5	3	Three	2	230/460	11 5/8	17 1/8	37
PNW	80PNW22.2	3	Three	3	208-220/460/575	8 3/8	28 1/4	51
PNW	80PNW23.7	3	Three	5	208-220/460/575	8 3/8	29 5/8	62

Pompa Tsurumi Submersible type PU Series

POMPA SUBMERSIBLE TSURUMI PU SERIES

The PU-series is one of the Tsurumi VANCS-series. Being made of stainless steel and special resin, the pump is not only lightweight but corrosion-resistant as well. Built-in vortex impeller and large passage facilitate pump operations to readily dispose of liquid containing various kinds of foreign matters.

1. Transferring wastewater between the tanks at small-scale treatment facility
2. Draining sewage from factory, residence, hotel, restaurant, etc.
3. Pumping rainwater and springwater at a place where foreign objects are likely to run into the water

Sewage Vortex Impeller PU
274KB

PU Series The PU is a multi-purpose pump with a semi-vortex impeller. Use of advanced materials achieves a light and solid construction. Automatic and auto-alternating versions are also available for all sizes.

PU Series Features

Watertight Cable Entrance with Anti-wicking block.

Permanently lubricated sealed ball bearings rated B-10 60,000 hours.

Built in motor protection

Continuous duty air filled copper wound highly efficient motor.

Corrosion Resistant Stainless Steel Motor Casing

Dual inside mechanical with Silicon Carbide vs. Ceramic bottom faces.

Ball type air Relief valve

Solids handling semi-vortex impeller

32Ft power cord
Available in Automatic Operation (PUA) / Auto Alternating (PUW)

Performance Range

Series	Model	Discharge Size (in.)	Phase	Motor Output (HP)	Voltage (V)	Diameter (in.)	Height (in.)	Weight (lbs.)
PU	50PU2.15	2	Three	1/5	230/460	8 7/8	14 7/8	15
PU	50PU2.15S	2	Single	1/5	115/230	8 7/8	14 7/8	15
PU	50PU2.25	2	Three	1/3	230/460	9 5/8	14 15/16	16
PU	50PU2.25S	2	Single	1/3	115/230	9 5/8	14 15/16	17
PU	50PU2.4	2	Three	1/2	230/460	9 5/8	15 1/4	17
PU	50PU2.4S	2	Single	1/2	115/230	9 5/8	15 1/4	19
PU	50PU2.75	2	Three	1	230/460	9 5/8	15 7/8	21
PU	50PU2.75S	2	Single	1	115/230	9 5/8	15 7/8	24
PU	80PU21.5	3	Three	2	230/460	11 5/8	18 11/16	35
PU	80PU22.2	3	Three	3	208-220/460/575	8 3/8	22 15/16	49
PU	80PU23.7	3	Three	5	208-220/460/575	8 3/8	24 5/16	60
PUA	50PUA2.15	2	Three	1/5	230/460	8 7/8	14 7/8	14
PUA	50PUA2.15S	2	Single	1/5	115/230	8 7/8	14 7/8	15
PUA	50PUA2.25	2	Three	1/3	230/460	9 5/8	14 15/16	17
PUA	50PUA2.25S	2	Single	1/3	115/230	9 5/8	14 15/16	18
PUA	50PUA2.4	2	Three	1/2	230/460	9 5/8	15 1/4	19
PUA	50PUA2.4S	2	Single	1/2	115/230	9 5/8	15 1/4	20
PUA	50PUA2.75	2	Three	1	230/460	9 5/8	15 7/8	22
PUA	50PUA2.75S	2	Single	1	115/230	9 5/8	15 7/8	25
PUA	80PUA21.5	3	Three	2	230/460	11 5/8	18 11/16	36
PUA	80PUA22.2	3	Three	3	208-220/460/575	8 3/8	31 1/8	51
PUA	80PUA23.7	3	Three	5	208-220/460/575	8 3/8	32 1/2	62
PUW	50PUW2.15	2	Three	1/5	230/460	8 7/8	14 7/8	14
PUW	50PUW2.15S	2	Single	1/5	115/230	8 7/8	14 7/8	16
PUW	50PUW2.25	2	Three	1/3	230/460	9 5/8	14 15/16	17
PUW	50PUW2.25S	2	Single	1/3	115/230	9 5/8	14 15/16	19
PUW	50PUW2.4	2	Three	1/2	230/460	9 5/8	15 1/4	19
PUW	50PUW2.4S	2	Single	1/2	115/230	9 5/8	15 1/4	20
PUW	50PUW2.75	2	Three	1	230/460	9 5/8	15 7/8	23
PUW	50PUW2.75S	2	Single	1	115/230	9 5/8	15 7/8	25
PUW	80PUW21.5	3	Three	2	230/460	11 5/8	18 11/16	37
PUW	80PUW22.2	3	Three	3	208-220/460/575	8 3/8	29 1/8	51
PUW	80PUW23.7	3	Three	5	208-220/460/575	8 3/8	30 1/2	62

Tsurumi Submersible PSF Series

Tsurumi Pump Type PSF Series

The PSF-series is one of the Tsurumi VANCS-series. Being made of stainless steel and special resin, the pump is not only lightweight but corrosion-resistant as well. Built-in closed impeller generates the highest head in VANCS-series.

1. Draining treated water at small-scale wastewater treatment facility
2. Pumping rainwater and springwater from basement
3. Supplying treated water for defoaming at small-scale wastewater treatment facility

Effluent Closed Impeller PSF
272KB

PSF Series The PSF pump features the highest head in this class. 304 Stainless-steel and composite resin materials are used in all wetted parts.

PSF Series Features

Watertight Cable Entrance with Anti-wicking block.

Permanently lubricated sealed ball bearings rated B-10 60,000 hours.

Built in motor protection

Continuous duty air filled copper wound highly efficient motor.

Corrosion Resistant Stainless Steel Motor Casing

Dual inside mechanical with Silicon Carbide vs. Ceramic bottom faces.

Ball type air Relief valve

Solids handling semi-vortex impeller

32Ft power cord
Available in Automatic Operation (PSFA) / Auto Alternating (PSFW)

Performance Range

Series	Model	Discharge Size (in.)	Phase	Motor Output (HP)	Voltage (V)	Diameter (in.)	Height (in.)	Weight (lbs.)
PSF	50PSF2.25	2	Three	1/3	230/460	9 5/8	14 15/16	16
PSF	50PSF2.25S	2	Single	1/3	115/230	9 5/8	14 15/16	17
PSF	50PSF2.4	2	Three	1/2	230/460	9 5/8	15 1/4	18
PSF	50PSF2.4S	2	Single	1/2	115/230	9 5/8	15 1/4	19
PSF	50PSF2.75	2	Three	1	230/460	9 5/8	15 7/8	21
PSF	50PSF2.75S	2	Single	115/230	9 5/8	15 7/8	15 7/8	24
PSF	80PSF21.5	3	Three	2	230/460	11 5/8	17 1/8	35
PSFA	50PSFA2.25	2	Three	1/3	230/460	9 5/8	14 15/16	17
PSFA	50PSFA2.25S	2	Single	1/3	115/230	9 5/8	14 15/16	18
PSFA	50PSFA2.4	2	Three	1/2	230/460	9 5/8	15 1/4	19
PSFA	50PSFA2.4S	2	Single	1/2	115/230	9 5/8	15 1/4	20
PSFA	50PSFA2.75	2	Three	1	230/460	9 5/8	15 7/8	23
PSFA	50PSFA2.75S	2	Single	1	115/230	9 5/8	15 7/8	25
PSFA	80PSFA21.5	3	Three	2	208-220/440	7 11/16	24 1/2	37
PSFW	50PSFW2.25	2	Three	1/3	230/460	9 5/8	14 15/16	17
PSFW	50PSFW2.25S	2	Single	1/3	115/230	9 5/8	14 15/16	19
PSFW	50PSFW2.4	2	Three	1/2	230/460	9 5/8	15 1/4	19
PSFW	50PSFW2.4S	2	Single	1/2	115/230	9 5/8	15 1/4	20
PSFW	50PSFW2.75	2	Three	1	230/460	9 5/8	15 7/8	23
PSFW	50PSFW2.75S	2	Single	1	115/230	9 5/8	15 7/8	25
PSFW	80PSFW21.5	3	Three	2	208-220/440	7 11/16	22 1/2	37

Pompa Submersible TSURUMI type BZ Series

Pompa Air khusus untuk pengolahan Limbah
Tsurumi BZ Series 

The BZ-series has a proprietary single-channel, solid handling impeller that allows the pump to handle solid matters with up to 80 mm in diameter. The pump can efficiently transfer sewage and wastewater containing solid matters.

1. Transferring sewage and wastewater to wastewater treatment plant
2. Draining wastewater from industrial plant
3. Draining effluent from residence, hotel, commercial complex, etc.

Sewage Channel Impeller BZ
435KB

BZ Series Incorporates a channel impeller developed exclusively for sewage pumps, ensuring the efficient transfer of suspended solids.

BZ Series Features

Single vane, cast iron impeller
Passes 3" diameter solids without clogging
Class F insulation minimizes operating costs
Built-in motor protection for surge and run-dry conditions

Performance Range

Model	Discharge Size (in.)	Phase	Motor Output (HP)	Voltage (V)	Diameter (in.)	Height (in.)	Weight - Freestanding (lbs.)	Weight - TOS Model (lbs.)
100BZ41.5	4	Three	2	230/460/575	21 11/16	24 13/16	176	163
100BZ411	4	Three	15	230/460/575	28 5/8	40 1/4	483	467
100BZ42.2	4	Three	3	230/460/575	21 11/16	24 13/16	176	163
100BZ43.7	4	Three	5	230/460/575	23	26 13/16	220	207
100BZ45.5	4	Three	7.5	230/460	28 3/16	36 7/16	386	370
100BZ47.5	4	Three	10	230/460/575	28 3/16	40 1/4	428	412

Pompa Submersible dengan Cutter - Tsurumi C Series

Pompa Submersible dengan CUTTER  TSURUMI C Series
Pompa khusus yang dapat memotong partikel padat seperti Kaleng botol , dan material lainnya yang bisa menyebabkan saluran mampet , dan macet  . Dengan Mata pisau khusus yang kuat bisa menghancurkan beragam material padat .

Tsurumi C Series
The C-series incorporates a channel impeller with cutter mechanism that cuts up foreign matters sucked up with sewage to prevent the pump from clogging. The mechanism is composed of a sintered tungsten carbide alloy edge brazed on an impeller vane and a suction cover with a saw-tooth suction port.

1. Transferring sewage and wastewater to wastewater treatment plant
2. Draining wastewater from industrial plant
3. Draining effluent from residence, hotel, commercial complex, etc.

Sewage Cutter Impeller C
819KB

C Series A serrated suction cover is used in combination with a tungsten carbide tip impeller ensuring that fibrous foreign matter is cut up, and sewage is transferred without clogging.

C Series Features

Single and multi-vane cast iron impellers with tungsten carbide tips
Serrated suction cover is field replaceable/adjustable
Built-in thermal protector prevents motor failure due to overloading or accidental run-dry conditions.
Handles residential, commercial, and indiustrial sewage
Ideal for poultry, dairy. hog, and fish waste processing
Suitable for problem sump applications with unpredictable solids incursion found in schools, hospitals, industrial laundries
High head capabilities available on certain models

Performance Range

Series	Model	Discharge Size (in.)	Motor Output (HP)	Voltage (V)	Diameter (in.)	Height (in.)	Weight - Freestanding (lbs.)	Weight - TOS Model (lbs.)
C HighHead	80C211	3	15	230/460/575	13 9/16	36 1/2	326	313
C HighHead	80C22.2	3	3	230/460/575	10 1/4	24 1/16	139	130
C HighHead	80C23.7	3	5	230/460/575	10 1/4	24 1/16	141	132
C HighHead	80C25.5	3	7.5	230/460/575	13 9/16	34 5/8	278	265
C HighHead	80C27.5	3	10	230/460/575	13 9/16	34 5/8	284	271
C Series	100C411	4	15	230/460/575	17 3/16	39 3/8	406	390
C Series	100C415	4	20	230/460/575	17 3/16	24 5/8	706	690
C Series	100C42.2	4	3	230/460/575	12 3/4	24 1/4	154	141
C Series	100C43.7	4	5	230/460/575	13 1/8	27 3/16	183	170
C Series	100C45.5	4	7.5	230/460/575	16 1/8	35 3/4	309	293
C Series	100C47.5	4	10	230/460/575	16 1/8	36 9/16	349	334
C Series	50C2.75	2	1	230/460/575	9 13/16	16 5/16	53	51
C Series	50C2.75S	2	1	115/230	9 13/16	20 9/16	70	66
C Series	80C21.5	3	2	230/460/575	9 13/16	21 1/8	79	75
C Series	80C41.5	3	2	230/460/575	12 7/16	23	119	115

Tsurumi MG Series with Chromium Impeler

Pompa TSURUMI dengan Impeler CHROMIUM

The MG-series has a grinding mechanism in its suction port, and it cuts incoming solid into small pieces. This enables the pump to transfer sewage via a small diameter pipe without the fear of clogging.

1. Transferring sewage from residence in pressurized sewerage system
2. Draining wastewater at exhibition site or campsite, etc.

Sewage Vortex Impeller MG
700KB

MG Series Foreign matter is finely ground up by the built-in grinder mechanism and discharged by a vortex impeller. Tsurumi submersible grinder pumps utilize a grinding mechanism in the suction port to crush foreign matter into fine particles before discharging the waste.

MG Series Features

Semi-vortex high chrome impeller
High chromium grinder mechanism
Ideal for small scale sewage systems

Performance Range

Model	Discharge Size (in.)	Phase	Motor Output (HP)	Voltage (V)	Diameter (in.)	Height (in.)	Weight - Freestanding (lbs.)	Weight - TOS Model (lbs.)
50MG21.5	2	Three	2	230/460/575	14 3/16	21 15/16	79	79
50MG22.2	2	Three	3	230/460/575	17 1/4	23 3/8	170	161
50MG23.7	2	Three	5	230/460/575	17 1/4	23 3/8	172	163

Tsurumi Pompa type B Series

Tsurumi Pump Submersible B Series 
Pompa Limbah dan pompa kolam Non Clog Pump
Cocok untuk penggunaan industri pengolahan air limbah dan water treatment 

The B-series is the basic model of the Tsurumi submersible sewage pumps, and it can be used for various kinds of field. A channel impeller practically prevents internal clogging and enables the pump to efficiently transfer sewage and wastewater containing solid matters. It is available as an extended line-up from 50 to 800 mm discharge bores.

1. Transferring sewage and wastewater to wastewater treatment plant
2. Draining wastewater from industrial plant
3. Draining effluent from residence, hotel, commercial complex, etc.
4. Pumping storm water at flood control facility

Sewage Channel Impeller B
1884KB

B Series Our B Series non-clog pumps are used primarily in municipal water supply stations and sewage treatment plants for pumping water, sewage, and digested sludge. In industry, these pumps are efficient for controlling cooling water, process and wastewater, and abrasive materials.

B Series Features

Semi-open, single vane impellers (1 hp - 5 hp models)

Enclosed multi-vane impellers (7.5 hp - 300 hp models)

Field adjustable/replaceable wear plates

Highly efficient air filled motors for continuous duty operation

Available with class E, B, F insulation to minimize operation costs. Double inside mechanical seals with Sic-Sic faces operate in a separate oil-filled chamber.

Anti-wicking block prevents water incursion to the stator if cable is accidentally damaged

Double-shielded, permanently lubricated high-temp C3 ball bearings rated for B-10 life of 60,000 hours

Water jacket ensures perfect water cooling by circulating drainage around the motor housing (available on 30 hp or above)

Performance Range

Series	Model	Discharge Size (in.)	Phase	Motor Output (HP)	Voltage (V)	Diameter (in.)	Height (in.)	Weight (lbs.)
B Series	100B42.2	4	Three	3	230/460/575	23 7/16	24 1/4	154(Free)/141(TOS)
B Series	100B43.7	4	Three	5	230/460/575	23 11/16	27 3/16	190(Free)/176(TOS)
B Series	100B43.7H	4	Three	5	230/460/575	23 7/16	26 1/4	183(Free)/170(TOS)
B Series	100B45.5	4	Three	7 1/2	230/460/575	27	35 13/16	324(Free)/309(TOS)
B Series	100B47.5	4	Three	10	230/460/575	27	36 5/8	371(Free)/356(TOS)
B Series	100B47.5L	6	Three	10	230/460/575	34 5/16	42 3/4	440(Free)/380(TOS)
B Series	150B411	6	Three	15	230/460/575	35 1/4	43 1/4	550(Free)/490(TOS)
B Series	150B415	6	Three	20	230/460/575	35 1/4	46	600(Free)/530(TOS)
B Series	150B47.5H	6	Three	10	230/460/575	32 13/16	37 1/2	460(Free)/400(TOS)
B Series	150B63.7	6	Three	5	230/460/575	33	35 9/16	620(Free)/550(TOS)
B Series	200B415	8	Three	20	230/460/575	38 1/4	47 1/16	660(Free)/630(TOS)
B Series	200B47.5	8	Three	10	230/460/575	36 7/16	42 3/4	460(Free)/470(TOS)
B Series	50B2.75	2	Three	1	230/460/575	15 15/16	17 5/16	55(Free)/53(TOS)
B Series	50B2.75H(S)	2	3ø/1ø	1	115/230 (1ø) 230/460/575 (3ø)	15 15/16	16 5/16	53(Free)/51(TOS)
B Series	80B21.5	3	Three	2	230/460/575	17 9/16	21 1/8	79(Free)/75(TOS)
BK Series	150BK422	6	Three	30	230/460/575	38 7/8	53 5/16	1220(Free)/1090(TOS)
BK Series	200BK422	8	Three	30	230/460/575	42 13/16	51 15/16	1230(Free)/1100(TOS)
BK Series	200BK422H	8	Three	30	230/460/575	41 1/16	53 5/16	1230(Free)/1110(TOS)