Senin, 14 Oktober 2013

Pompa Limbah Tsurumi - PN Series

Tsurumi Waste Water Pump Submersible  Tsurumi PN Series 
Pompa Khusus cocok untuk Waster water / Air kotor / limbah

 The PN-series is one of the Tsurumi VANCS-series. Being made of stainless steel and special resin, the pump is not only lightweight but corrosion-resistant as well. The semi-vortex pump design with moderate impeller passage provides efficient performance for versatile applications.
Application
  1. Draining wastewater from residence, hotel, restaurant, etc
  2. Pumping rainwater and springwater from basement
  3. Circulating water in waterscape garden (e.g. waterfall, fountain, koi pond, etc)

PN Series

PN Series

The main components of the PN Pump are made of 304 stainless-steel and composite resin materials, making this an ultra-lightweight pump. Suitable for effluent applications where large solids are not likely to exist. Automatic and auto-alternating versions are available in all sizes.

PN

PN Series Features

Watertight Cable Entrance with Anti-wicking block.
Permanently lubricated sealed ball bearings rated B-10 60,000 hours.
Built in motor protection
Continuous duty air filled copper wound highly efficient motor.
Corrosion Resistant Stainless Steel Motor Casing.
Dual inside mechanical with Silicon Carbide vs. Ceramic bottom faces.
Ball type air Relief valve
Solids handling semi-vortex impeller
Available Automatic Operation (PNA) / Auto Alternating (PNW)

Performance Range PN Series


Series Model Discharge Size (in.) Phase Motor Output (HP) Voltage (V) Diameter (in.) Height (in.) Weight (lbs.)
PN 50PN2.25 2 Three 1/3 230/460 9 5/8 14 15/16 16
PN 50PN2.25S 2 Single 1/3 115/230 9 5/8 14 15/16 17
PN 50PN2.4 2 Three 1/2 230/460 9 5/8 15 1/4 18
PN 50PN2.4S 2 Single 1/2 115/230 9 5/8 15 1/4 19
PN 50PN2.75 2 Three 1 230/460 9 5/8 15 7/8 22
PN 50PN2.75S 2 Single 1 115/230 9 5/8 15 7/8 24
PN 80PN21.5 3 Three 2 230/460 11 5/8 17 1/8 35
PN 80PN22.2 3 Three 3 208-220/460/575 8 3/8 22 49
PN 80PN23.7 3 Three 5 208-220/460/575 8 3/8 23 3/8 60
PNA 50PNA2.25 2 Three 1/3 230/460 9 5/8 14 15/16 17
PNA 50PNA2.25S 2 Single 1/3 115/230 9 5/8 14 15/16 18
PNA 50PNA2.4 2 Three 1/2 230/460 9 5/8 15 1/4 18
PNA 50PNA2.4S 2 Single 1/2 115/230 9 5/8 15 1/4 20
PNA 50PNA2.75 2 Three 1 230/460 9 5/8 15 7/8 23
PNA 50PNA2.75S 2 Single 1 115/230 9 5/8 15 7/8 25
PNA 80PNA21.5 3 Three 2 230/460 11 5/8 17 1/8 36
PNA 80PNA22.2 3 Three 3 208-220/460/575 8 3/8 28 1/4 51
PNA 80PNA23.7 3 Three 5 208-220/460/575 8 3/8 29 5/8 62
PNW 50PNW2.25 2 Three 1/3 230/460 9 5/8 14 15/16 17
PNW 50PNW2.25S 2 Single 1/3 115/230 9 5/8 14 15/16 19
PNW 50PNW2.4 2 Three 1/2 230/460 9 5/8 15 1/4 19
PNW 50PNW2.4S 2 Single 1/2 115/230 9 5/8 15 1/4 20
PNW 50PNW2.75 2 Three 1 230/460 9 5/8 15 7/8 23
PNW 50PNW2.75S 2 Single 1 115/230 9 5/8 15 7/8 25
PNW 80PNW21.5 3 Three 2 230/460 11 5/8 17 1/8 37
PNW 80PNW22.2 3 Three 3 208-220/460/575 8 3/8 28 1/4 51
PNW 80PNW23.7 3 Three 5 208-220/460/575 8 3/8 29 5/8 62

Pompa Tsurumi Submersible type PU Series

POMPA SUBMERSIBLE TSURUMI PU SERIES

Sewage Vortex Impeller PU The PU-series is one of the Tsurumi VANCS-series. Being made of stainless steel and special resin, the pump is not only lightweight but corrosion-resistant as well. Built-in vortex impeller and large passage facilitate pump operations to readily dispose of liquid containing various kinds of foreign matters.
Application
  1. Transferring wastewater between the tanks at small-scale treatment facility
  2. Draining sewage from factory, residence, hotel, restaurant, etc.
  3. Pumping rainwater and springwater at a place where foreign objects are likely to run into the water

PU Series

PU Series

The PU is a multi-purpose pump with a semi-vortex impeller. Use of advanced materials achieves a light and solid construction. Automatic and auto-alternating versions are also available for all sizes.

PU Series

PU Series Features

Watertight Cable Entrance with Anti-wicking block.

Permanently lubricated sealed ball bearings rated B-10 60,000 hours.

Built in motor protection

Continuous duty air filled copper wound highly efficient motor.

Corrosion Resistant Stainless Steel Motor Casing

Dual inside mechanical with Silicon Carbide vs. Ceramic bottom faces.

Ball type air Relief valve

Solids handling semi-vortex impeller

32Ft power cord
Available in Automatic Operation (PUA) / Auto Alternating (PUW)

Performance Range PU Series


Series Model Discharge Size (in.) Phase Motor Output (HP) Voltage (V) Diameter (in.) Height (in.) Weight (lbs.)
PU 50PU2.15 2 Three 1/5 230/460 8 7/8 14 7/8 15
PU 50PU2.15S 2 Single 1/5 115/230 8 7/8 14 7/8 15
PU 50PU2.25 2 Three 1/3 230/460 9 5/8 14 15/16 16
PU 50PU2.25S 2 Single 1/3 115/230 9 5/8 14 15/16 17
PU 50PU2.4 2 Three 1/2 230/460 9 5/8 15 1/4 17
PU 50PU2.4S 2 Single 1/2 115/230 9 5/8 15 1/4 19
PU 50PU2.75 2 Three 1 230/460 9 5/8 15 7/8 21
PU 50PU2.75S 2 Single 1 115/230 9 5/8 15 7/8 24
PU 80PU21.5 3 Three 2 230/460 11 5/8 18 11/16 35
PU 80PU22.2 3 Three 3 208-220/460/575 8 3/8 22 15/16 49
PU 80PU23.7 3 Three 5 208-220/460/575 8 3/8 24 5/16 60
PUA 50PUA2.15 2 Three 1/5 230/460 8 7/8 14 7/8 14
PUA 50PUA2.15S 2 Single 1/5 115/230 8 7/8 14 7/8 15
PUA 50PUA2.25 2 Three 1/3 230/460 9 5/8 14 15/16 17
PUA 50PUA2.25S 2 Single 1/3 115/230 9 5/8 14 15/16 18
PUA 50PUA2.4 2 Three 1/2 230/460 9 5/8 15 1/4 19
PUA 50PUA2.4S 2 Single 1/2 115/230 9 5/8 15 1/4 20
PUA 50PUA2.75 2 Three 1 230/460 9 5/8 15 7/8 22
PUA 50PUA2.75S 2 Single 1 115/230 9 5/8 15 7/8 25
PUA 80PUA21.5 3 Three 2 230/460 11 5/8 18 11/16 36
PUA 80PUA22.2 3 Three 3 208-220/460/575 8 3/8 31 1/8 51
PUA 80PUA23.7 3 Three 5 208-220/460/575 8 3/8 32 1/2 62
PUW 50PUW2.15 2 Three 1/5 230/460 8 7/8 14 7/8 14
PUW 50PUW2.15S 2 Single 1/5 115/230 8 7/8 14 7/8 16
PUW 50PUW2.25 2 Three 1/3 230/460 9 5/8 14 15/16 17
PUW 50PUW2.25S 2 Single 1/3 115/230 9 5/8 14 15/16 19
PUW 50PUW2.4 2 Three 1/2 230/460 9 5/8 15 1/4 19
PUW 50PUW2.4S 2 Single 1/2 115/230 9 5/8 15 1/4 20
PUW 50PUW2.75 2 Three 1 230/460 9 5/8 15 7/8 23
PUW 50PUW2.75S 2 Single 1 115/230 9 5/8 15 7/8 25
PUW 80PUW21.5 3 Three 2 230/460 11 5/8 18 11/16 37
PUW 80PUW22.2 3 Three 3 208-220/460/575 8 3/8 29 1/8 51
PUW 80PUW23.7 3 Three 5 208-220/460/575 8 3/8 30 1/2 62

Tsurumi Submersible PSF Series

Tsurumi Pump Type PSF Series

The PSF-series is one of the Tsurumi VANCS-series. Being made of stainless steel and special resin, the pump is not only lightweight but corrosion-resistant as well. Built-in closed impeller generates the highest head in VANCS-series.
Application
  1. Draining treated water at small-scale wastewater treatment facility
  2. Pumping rainwater and springwater from basement
  3. Supplying treated water for defoaming at small-scale wastewater treatment facility
PSF Series

PSF Series

The PSF pump features the highest head in this class. 304 Stainless-steel and composite resin materials are used in all wetted parts.

PSF Series

PSF Series Features

Watertight Cable Entrance with Anti-wicking block.

Permanently lubricated sealed ball bearings rated B-10 60,000 hours.

Built in motor protection

Continuous duty air filled copper wound highly efficient motor.

Corrosion Resistant Stainless Steel Motor Casing

Dual inside mechanical with Silicon Carbide vs. Ceramic bottom faces.

Ball type air Relief valve

Solids handling semi-vortex impeller

32Ft power cord
Available in Automatic Operation (PSFA) / Auto Alternating (PSFW)

Performance Range PSF Series


Series Model Discharge Size (in.) Phase Motor Output (HP) Voltage (V) Diameter (in.) Height (in.) Weight (lbs.)
PSF 50PSF2.25 2 Three 1/3 230/460 9 5/8 14 15/16 16
PSF 50PSF2.25S 2 Single 1/3 115/230 9 5/8 14 15/16 17
PSF 50PSF2.4 2 Three 1/2 230/460 9 5/8 15 1/4 18
PSF 50PSF2.4S 2 Single 1/2 115/230 9 5/8 15 1/4 19
PSF 50PSF2.75 2 Three 1 230/460 9 5/8 15 7/8 21
PSF 50PSF2.75S 2 Single 115/230 9 5/8 15 7/8 15 7/8 24
PSF 80PSF21.5 3 Three 2 230/460 11 5/8 17 1/8 35
PSFA 50PSFA2.25 2 Three 1/3 230/460 9 5/8 14 15/16 17
PSFA 50PSFA2.25S 2 Single 1/3 115/230 9 5/8 14 15/16 18
PSFA 50PSFA2.4 2 Three 1/2 230/460 9 5/8 15 1/4 19
PSFA 50PSFA2.4S 2 Single 1/2 115/230 9 5/8 15 1/4 20
PSFA 50PSFA2.75 2 Three 1 230/460 9 5/8 15 7/8 23
PSFA 50PSFA2.75S 2 Single 1 115/230 9 5/8 15 7/8 25
PSFA 80PSFA21.5 3 Three 2 208-220/440 7 11/16 24 1/2 37
PSFW 50PSFW2.25 2 Three 1/3 230/460 9 5/8 14 15/16 17
PSFW 50PSFW2.25S 2 Single 1/3 115/230 9 5/8 14 15/16 19
PSFW 50PSFW2.4 2 Three 1/2 230/460 9 5/8 15 1/4 19
PSFW 50PSFW2.4S 2 Single 1/2 115/230 9 5/8 15 1/4 20
PSFW 50PSFW2.75 2 Three 1 230/460 9 5/8 15 7/8 23
PSFW 50PSFW2.75S 2 Single 1 115/230 9 5/8 15 7/8 25
PSFW 80PSFW21.5 3 Three 2 208-220/440 7 11/16 22 1/2 37

Sabtu, 12 Oktober 2013

Pompa Submersible TSURUMI type BZ Series

Pompa Air khusus untuk pengolahan Limbah
Tsurumi BZ Series 

The BZ-series has a proprietary single-channel, solid handling impeller that allows the pump to handle solid matters with up to 80 mm in diameter. The pump can efficiently transfer sewage and wastewater containing solid matters.
Application
  1. Transferring sewage and wastewater to wastewater treatment plant
  2. Draining wastewater from industrial plant
  3. Draining effluent from residence, hotel, commercial complex, etc.


BZ Series

BZ Series

Incorporates a channel impeller developed exclusively for sewage pumps, ensuring the efficient transfer of suspended solids.

BZ Series

BZ Series Features

Single vane, cast iron impeller
Passes 3" diameter solids without clogging
Class F insulation minimizes operating costs
Built-in motor protection for surge and run-dry conditions

Performance Range BZ Series


Model Discharge Size (in.) Phase Motor Output (HP) Voltage (V) Diameter (in.) Height (in.) Weight - Freestanding (lbs.) Weight - TOS Model (lbs.)
100BZ41.5 4 Three 2 230/460/575 21 11/16 24 13/16 176 163
100BZ411 4 Three 15 230/460/575 28 5/8 40 1/4 483 467
100BZ42.2 4 Three 3 230/460/575 21 11/16 24 13/16 176 163
100BZ43.7 4 Three 5 230/460/575 23 26 13/16 220 207
100BZ45.5 4 Three 7.5 230/460 28 3/16 36 7/16 386 370
100BZ47.5 4 Three 10 230/460/575 28 3/16 40 1/4 428 412

Pompa Submersible dengan Cutter - Tsurumi C Series

Pompa Submersible dengan CUTTER  TSURUMI C Series
Pompa khusus yang dapat memotong partikel padat seperti Kaleng botol , dan material lainnya yang bisa menyebabkan saluran mampet , dan macet  . Dengan Mata pisau khusus yang kuat bisa menghancurkan beragam material padat .

Tsurumi C Series
The C-series incorporates a channel impeller with cutter mechanism that cuts up foreign matters sucked up with sewage to prevent the pump from clogging. The mechanism is composed of a sintered tungsten carbide alloy edge brazed on an impeller vane and a suction cover with a saw-tooth suction port.
Application
  1. Transferring sewage and wastewater to wastewater treatment plant
  2. Draining wastewater from industrial plant
  3. Draining effluent from residence, hotel, commercial complex, etc.


C Series

C Series

A serrated suction cover is used in combination with a tungsten carbide tip impeller ensuring that fibrous foreign matter is cut up, and sewage is transferred without clogging.

C Series

C Series Features

Single and multi-vane cast iron impellers with tungsten carbide tips
Serrated suction cover is field replaceable/adjustable
Built-in thermal protector prevents motor failure due to overloading or accidental run-dry conditions.
Handles residential, commercial, and indiustrial sewage
Ideal for poultry, dairy. hog, and fish waste processing
Suitable for problem sump applications with unpredictable solids incursion found in schools, hospitals, industrial laundries
High head capabilities available on certain models

Performance Range C Series


Series Model Discharge Size (in.) Motor Output (HP) Voltage (V) Diameter (in.) Height (in.) Weight - Freestanding (lbs.) Weight - TOS Model (lbs.)
C HighHead 80C211 3 15 230/460/575 13 9/16 36 1/2 326 313
C HighHead 80C22.2 3 3 230/460/575 10 1/4 24 1/16 139 130
C HighHead 80C23.7 3 5 230/460/575 10 1/4 24 1/16 141 132
C HighHead 80C25.5 3 7.5 230/460/575 13 9/16 34 5/8 278 265
C HighHead 80C27.5 3 10 230/460/575 13 9/16 34 5/8 284 271
C Series 100C411 4 15 230/460/575 17 3/16 39 3/8 406 390
C Series 100C415 4 20 230/460/575 17 3/16 24 5/8 706 690
C Series 100C42.2 4 3 230/460/575 12 3/4 24 1/4 154 141
C Series 100C43.7 4 5 230/460/575 13 1/8 27 3/16 183 170
C Series 100C45.5 4 7.5 230/460/575 16 1/8 35 3/4 309 293
C Series 100C47.5 4 10 230/460/575 16 1/8 36 9/16 349 334
C Series 50C2.75 2 1 230/460/575 9 13/16 16 5/16 53 51
C Series 50C2.75S 2 1 115/230 9 13/16 20 9/16 70 66
C Series 80C21.5 3 2 230/460/575 9 13/16 21 1/8 79 75
C Series 80C41.5 3 2 230/460/575 12 7/16 23 119 115

Tsurumi MG Series with Chromium Impeler

Pompa TSURUMI dengan Impeler CHROMIUM

The MG-series has a grinding mechanism in its suction port, and it cuts incoming solid into small pieces. This enables the pump to transfer sewage via a small diameter pipe without the fear of clogging.
Application
  1. Transferring sewage from residence in pressurized sewerage system
  2. Draining wastewater at exhibition site or campsite, etc.


MG Series

MG Series

Foreign matter is finely ground up by the built-in grinder mechanism and discharged by a vortex impeller.

Tsurumi submersible grinder pumps utilize a grinding mechanism in the suction port to crush foreign matter into fine particles before discharging the waste.

MG Series

MG Series Features

Semi-vortex high chrome impeller
High chromium grinder mechanism
Ideal for small scale sewage systems

Performance Range MG Series


Model Discharge Size (in.) Phase Motor Output (HP) Voltage (V) Diameter (in.) Height (in.) Weight - Freestanding (lbs.) Weight - TOS Model (lbs.)
50MG21.5 2 Three 2 230/460/575 14 3/16 21 15/16 79 79
50MG22.2 2 Three 3 230/460/575 17 1/4 23 3/8 170 161
50MG23.7 2 Three 5 230/460/575 17 1/4 23 3/8 172 163

Tsurumi Pompa type B Series

Tsurumi Pump Submersible B Series 
Pompa Limbah dan pompa kolam Non Clog Pump
Cocok untuk penggunaan industri pengolahan air limbah dan water treatment 

The B-series is the basic model of the Tsurumi submersible sewage pumps, and it can be used for various kinds of field. A channel impeller practically prevents internal clogging and enables the pump to efficiently transfer sewage and wastewater containing solid matters. It is available as an extended line-up from 50 to 800 mm discharge bores.

Application
  1. Transferring sewage and wastewater to wastewater treatment plant
  2. Draining wastewater from industrial plant
  3. Draining effluent from residence, hotel, commercial complex, etc.
  4. Pumping storm water at flood control facility


B Series

B Series

Our B Series non-clog pumps are used primarily in municipal water supply stations and sewage treatment plants for pumping water, sewage, and digested sludge. In industry, these pumps are efficient for controlling cooling water, process and wastewater, and abrasive materials.

50B2.75 50B2.75

B Series Features

Semi-open, single vane impellers (1 hp - 5 hp models)

Enclosed multi-vane impellers (7.5 hp - 300 hp models)

Field adjustable/replaceable wear plates

Highly efficient air filled motors for continuous duty operation

Available with class E, B, F insulation to minimize operation costs. Double inside mechanical seals with Sic-Sic faces operate in a separate oil-filled chamber.

Anti-wicking block prevents water incursion to the stator if cable is accidentally damaged

Double-shielded, permanently lubricated high-temp C3 ball bearings rated for B-10 life of 60,000 hours

Water jacket ensures perfect water cooling by circulating drainage around the motor housing (available on 30 hp or above)

Performance Range B Series


Series Model Discharge Size (in.) Phase Motor Output (HP) Voltage (V) Diameter (in.) Height (in.) Weight (lbs.)
B Series 100B42.2 4 Three 3 230/460/575 23 7/16 24 1/4 154(Free)/141(TOS)
B Series 100B43.7 4 Three 5 230/460/575 23 11/16 27 3/16 190(Free)/176(TOS)
B Series 100B43.7H 4 Three 5 230/460/575 23 7/16 26 1/4 183(Free)/170(TOS)
B Series 100B45.5 4 Three 7 1/2 230/460/575 27 35 13/16 324(Free)/309(TOS)
B Series 100B47.5 4 Three 10 230/460/575 27 36 5/8 371(Free)/356(TOS)
B Series 100B47.5L 6 Three 10 230/460/575 34 5/16 42 3/4 440(Free)/380(TOS)
B Series 150B411 6 Three 15 230/460/575 35 1/4 43 1/4 550(Free)/490(TOS)
B Series 150B415 6 Three 20 230/460/575 35 1/4 46 600(Free)/530(TOS)
B Series 150B47.5H 6 Three 10 230/460/575 32 13/16 37 1/2 460(Free)/400(TOS)
B Series 150B63.7 6 Three 5 230/460/575 33 35 9/16 620(Free)/550(TOS)
B Series 200B415 8 Three 20 230/460/575 38 1/4 47 1/16 660(Free)/630(TOS)
B Series 200B47.5 8 Three 10 230/460/575 36 7/16 42 3/4 460(Free)/470(TOS)
B Series 50B2.75 2 Three 1 230/460/575 15 15/16 17 5/16 55(Free)/53(TOS)
B Series 50B2.75H(S) 2 3ø/1ø 1 115/230 (1ø)
230/460/575 (3ø)
15 15/16 16 5/16 53(Free)/51(TOS)
B Series 80B21.5 3 Three 2 230/460/575 17 9/16 21 1/8 79(Free)/75(TOS)
BK Series 150BK422 6 Three 30 230/460/575 38 7/8 53 5/16 1220(Free)/1090(TOS)
BK Series 200BK422 8 Three 30 230/460/575 42 13/16 51 15/16 1230(Free)/1100(TOS)
BK Series 200BK422H 8 Three 30 230/460/575 41 1/16 53 5/16 1230(Free)/1110(TOS)